|
Applicators
& Transfer Pumps handling Liquid Fertilizer:
Pour Fluid Film® NAS into
the intake; turn the pump over once or twice to make sure the liquid is
coating all the interior. When it is time to use the pump again, it will
be in perfect working condition. Fluid Film® Liq. A works well in this
applications as well.
Balers Battery terminals:
Fluid Film is non-conductive, so after you clean around the battery
terminals make your connections, and then spray lightly with Fluid Film®.
The non-drying characteristics of Fluid Film® will provide long term
protection in this application. Fluid Film® will also keep battery hold
downs from corroding.
Bin Slides Blades/Cutters: Coat after sharpening.
Cab Door Hinges Chains:
When it comes to chain lubrication, Fluid Film® is an excellent choice for
a variety of reasons. Most chains fail due to wear and corrosion wear
inside the pin and bushing area. Fluid Film®, with its lanolin base, will
migrate and penetrate to the inside of the chain, preventing wear and
providing extended lubrication because Fluid Film® will not evaporate.
Fluid Film® will also displace any trapped water, leaving a barrier of
protection and containing sufficient body to resist fly off and water wash
off. In dusty environments, Fluid Film® is going to extend chain life by
penetrating to the inside of the chain, providing lubrication, and
resisting dirt buildup on the chain due to its slick, non-tacky
consistency. Fluid Film® holds up under a wide degree of temperatures,
will resist the high moisture present in certain manufacturing plants and,
because it won’t freeze, will prevent chain jam ups due to water frozen in
chain links. Fluid Film® was documented as having extended locomotive
drive chains in salt harvesting machinery by up to 300%.
Combines & Combine Chains
Control Cables
Conveyers
Cultivators
Fertilizer Spreaders: Hose down fertilizer spreader and apply
Fluid Film®. Fluid Film® can be applied over damp surfaces. Spray Fluid
Film® inside to protect from corrosion.
Hedge Trimmers & Clippers: Fluid Film® works great on trimmers
& clippers. Just apply a light film and let the trimmer run for a few
seconds to allow Fluid Film to penetrate effectively. Fluid Film® will not
burn greenery on cutting devices and will keep sap from sticking to
blades.
Inside Chippers/Shredders
Irrigation Fittings
Locks: Spray small amount of Fluid Film® in lock. Will not freeze,
making cold weather applications especially desirable, providing long-term
lubrication.
Pickup Truck Beds: Apply before bed liner is installed.
Pickup Truck Tailgates: Hinges plus sprayed inside to help keep
them from rusting from the inside out.
Preservation of Equipment Stored Outside
Pruning Sheers & Saws: Fluid Film® will help them slide easily &
prevent rust
Saddles: Fluid Film® works great as a leather conditioner to
shine and condition old working saddles.
Squeaky Leaf Springs
Three Point Hitch Tractor Cables & Shift Levers: Will prevent
seizing
Tools: Spray on tools directly and rub in with dry cloth, or
spray on cloth and rub in. Fluid Film® will leave a thin film which will
not come off on your hands or clothes but provide long-term protection.
Tractors
Trailer Balls & Hitches
Under lawnmower decks: Fluid Film® will prevent any corrosion from
occurring and ease in removal of grass build up.
Winches
Golf Course
Mowers:
One area for equipment health that should be checked regularly (daily) is
under the decks of mowers. When dirt and debris (lawn clippings, etc.)
build-up and aren’t removed they can quickly corrode the deck, shorten the
life of the bearings in the spindles and also contribute to lawn disease.
After a day of mowing, hose out the deck and apply a light spray of Fluid
Film®. Fluid Film® can be applied over a damp surface and will leave a
non-drying film, cutting off all oxygen from the surface and creating a
barrier of protection that will prevent all corrosion from occurring.
Because of its non-drying characteristics, Fluid Film® will also help keep
grass and debris from sticking, making clean-up a breeze.
Golf Carts:
For Golf Carts, Fluid Film® can be used to protect battery terminals.
Being non-conductive, make sure connections are made before applying Fluid
Film®. One application should keep battery terminals corrosion free for at
least a year. Fluid Film® is also an excellent undercoating which will
protect carts from fertilizers, pesticides and grass clippings.
Maintenance & Storage Facilities:
Use Fluid Film® in maintenance & storage facilities to protect from
corrosive elements such as fertilizers, pesticides and grass clippings.
Winterizing:
Equipment not properly maintained or suitably stored during the
cold-weather months can end up raising costs substantially by the time
spring rolls around. Heavy equipment needed during winter months require
extra attention, and proper maintenance during these periods can help
reduce the stresses involved with the cold-weather season. Battery
requirements are greater during winter months while their output is less,
so proper battery care is an important part of equipment maintenance
during winter. Fluid Film ® will effectively stop any corrosion from
occurring, allowing batteries to perform at optimum expenditure during
this period. For equipment being stored indoors or out, a liberal dose of
Fluid Film ® will prevent any corrosion from occurring throughout the
winter season. For equipment stored near fertilizers, Fluid Film ® will
protect all metals from atmospheric exposure.
Dethatchers, Verticutters and Seeders:
Equipment that is put into use for short, intense periods require extra
care to keep lubricated and corrosion free. Using Fluid Film® during prep,
application and storage will keep all metals, chains, tines and blades in
perfect operating condition for each piece of equipment.
Manufacturing /
Industrial Battery Connections:
Fluid Film® is non-conductive, so after you clean around the battery
terminals make your connections, and then spray lightly with Fluid Film®.
The non-drying characteristics of Fluid Film® will provide long term
protection in this application. Fluid Film® will also keep battery hold
downs from corroding.
Chains:
When it comes to chain lubrication, Fluid Film® is an excellent choice for
a variety of reasons. Most chains fail due to wear and corrosion wear
inside the pin and bushing area. Fluid Film®, with its lanolin base, will
migrate and penetrate to the inside of the chain, preventing wear and
providing extended lubrication because Fluid Film® will not evaporate.
Fluid Film® will also displace any trapped water, leaving a barrier of
protection and containing sufficient body to resist fly off and water wash
off. In dusty environments, Fluid Film® is going to extend chain life by
penetrating to the inside of the chain, providing lubrication, and
resisting dirt buildup on the chain due to its slick, non-tacky
consistency. Fluid Film® holds up under a high degree of temperatures,
will resist the high moisture present in certain manufacturing plants and,
because it won't freeze, will prevent chain jam ups due to water frozen in
chain links. Fluid Film® was documented as having extended locomotive
drive chains in salt harvesting machinery by up to 300%.
Conveyor Belt Rollers
Corrosion preventive on conveyors in salt plants
Cranes
Deck Cargo:
Nothing works better in a salt-water atmosphere. Apply Fluid Film® to
protect cargo from all corrosion.
Door Guides & Mechanisms
Door Hinges
Drill Bits and Press
Equipment in storage and transit:
John Deere uses Fluid Film® to protect their combines and tractors from
the corrosive effects of salt water when they are shipped overseas. Fluid
Film® can protect equipment being winterized or stored indoors for highly
extended periods of time.
Exposed Gears & Machined Surfaces
Forklifts: Fluid Film ® provides a lasting protective coating and lubrication on lift
chains, sliders, seat tracks, battery hold downs and battery terminals. It
will hold up in a high moisture environment as well as in extreme cold.
Hydraulic Cylinders
Internal Pump Preservative
Locks
Locomotive Drive Chains of Salt Harvesting Machinery:<
Testing was conducted to show that Fluid Film® extends drive chain life by
300%.
Lubricant & Dressing for wire-rope strands
Machinery Spare Parts
Metal Preservation
Mold release agent
Nuts, Bolts & Studs
Parking Meters:
Will help protect internal mechanisms. In an enclosed environment Fluid
Film should last indefinitely.
Piping
Piping Repairs
Pneumatic Tools
Preservation of Machined Surfaces
Preservative on beams in corrosive atmosphere such as pulp mill
Preservative on newspaper printing equipment
Pulleys
Shipping Parts:
Fluid Film® will protect all metal parts during shipping.
Sliding Parts
Snow Plows
Storage of Spare Parts
Swivels
Table Saws:
A thin film will keep table saws from rusting.
Tool Room - Tools:
Spray on tools directly and rub in with dry cloth, or spray on cloth and
rub in. Fluid Film® will leave a thin film which will not come off on
hands or clothes but provide long-term protection.
Uncoated Welds
Valves and Valve Stems
Window Hinges
Wire Preservation
Snow Equipment
Ice
Fishing Equipment
Locks: Fluid Film® will keep them from freezing.
Salt Spreaders
Ski Bindings
Ski Resort Equipment
Snow Blowers: Spray Fluid Film® on the auger housing, auger,
impeller and coat the inside of the discharge chute to protect and use as
a snow release agent. Wash down in Spring, and spray entire unit with
Fluid Film to protect over the summer.
Snow Climbing Equipment
Snow Plows: Spray on couplers to protect them. Spray on all pivot
points. Coat hydraulic rams for off season storage.
Snow Mobiles
Snow Shovels: Stops snow from sticking. Coat in Spring to protect
until next year.
Snow Sleds: Spray Fluid Film® on the underside of the sled to keep
snow from sticking and make the sled go faster. Spray on runners for
storage.
Undercoating of Vehicles: Fluid Film® will
penetrate to the base metal, providing long term protection from the
corrosive effects of salt, calcium, chloride, herbicides, pesticides and
fertilizers, resulting in a "no drip" application which will protect
vehicle's undercoating from metal deterioration. |
All Nuts, Bolts & Studs
Aluminum Housings
Battery Terminals:
Fluid Film® is non-conductive, so after you
clean around the battery terminals make your connections, and then spray
with Fluid Film®. The non-drying characteristics of Fluid Film® will
provide long term protection in this application. Fluid Film® will also
keep battery hold downs from corroding.
Bearings
Brake Cable (emergency), Speedometer Cable
Brake Levers Car Jacks
Chassis Squeaks
Chrome:
Protects and shines all chrome, such as rims and wheels,
and will keep bugs from sticking to chrome bumpers.
Dashboards and Vinyl Upholstery: Fluid Film® will keep them
protected and shining like new.
Door Hinges, Opening & Locking Mechanisms
Electrical Connections
Fittings Hood & Trunk Mechanisms
Inside Hub Caps
Inside Doors:
Stops them from rusting from the inside out.
Roller Tracks
Rubber Bumpers, Moldings and Rub Strips:
Renews and protects.
Seat Moving Tracks & Locks
Sliding Doors Steering Swivel Spring Seats
Throttle Cables
Tools:
Spray on tools directly and rub in with dry cloth, or spray
on cloth and rub in. Fluid Film® will leave a thin film which will not
come off on your hands or clothes but provide long-term protection
Trailer Attachments
Uncovered Springs Under Wheel Arches
Vehicle Undercoating:
Fluid Film® will penetrate to the base metal,
providing long term protection from the corrosive effects of salt,
calcium, chloride, herbicides, pesticides and fertilizers, resulting in a
"no drip" application which will protect vehicle's undercoating from metal
deterioration.
Wheels: Fluid Film® will keep brake dust from deteriorating the
finish.
Wheel Lugs
Wheel Wells
Winch CablesWindow Mechanisms
Wire Tie-Downs |
Battery Terminals: Fluid
Film® is non-conductive, so after you clean around the battery terminals
make your connections, and then spray with Fluid Film®. The non-drying
characteristics of Fluid Film® will provide long term protection in this
application.
Boat Trailers:
Apply to all electrical connections for lighting system, suspension leaf
springs and spring hangers, hull rollers (bearings or bushings), hitch
coupling connections, ball hitch, height Adjustors, winch, any exposed
metal.
Cables
Chains
Channels
Control Cables
Drive-line (transmission shifter)
Electronic Equipment:
Fluid Film® is non-conductive, and will not harm electrical connections.
Make sure that connections are made before applying Fluid Film®. Will
protect both the fuse block and the end connectors.
Fishing gear:
Lightly coat to protect from salt spray. Use Fluid Film® to lubricate
screws, bearings, cogs, drag washers and use as a protective coating.
Gears
Guides
Hinges
Levers
Locks:
Spray small amount of Fluid Film® in lock. Will not freeze, making cold
weather applications especially desirable, providing long-term
lubrication.
Nuts & Bolts
Outboard Engines: including interior housing to protect from
salt spray
Pulleys
Rollers
Sail Slides
Spray on entire surface of engine when winterizing to reduce corrosion.
Stanchions
Steering
Tackle Boxes
Throttle, Steering and Shift linkages:
Fluid Film® will protect and lubricate.
Thru-Hull fittings
Winches
Windlasses
Wire-Rope (cables)
Home & Garden
Vehicle Battery terminals:
Fluid Film® is non-conductive, so after you clean around the battery
terminals make your connections, and then spray with Fluid Film®. The
non-drying characteristics of Fluid Film® will provide long term
protection in this application.
Bicycle Chains:
Spray on chains, wipe off excess. Fluid Film® will leave a thin film which
will not build up dirt, providing long term lubrication and protection
from rust.
Drawer Runners
Fertilizer Spreaders:
Wash down fertilizer spreader and apply Fluid Film®. Fluid Film® can be
applied over damp surfaces. Spray Fluid Film® inside to protect from
corrosion.
Garage Door Tracks/Rollers
Gate Latches
Hedge Trimmers & Clippers:
Fluid Film® works great on trimmers & clippers. Just apply a light film
and let the trimmer run for a few seconds to allow Fluid Film to penetrate
effectively. Fluid Film® will not burn greenery on cutting devices and
will keep sap from sticking to blades.
Hinges
Inside Window Tracks
Locks:
Spray small amount of Fluid Film® in lock. Will not freeze, making cold
weather applications especially desirable, providing long-term
lubrication.
Metal Tool Boxes:
Spray inside to keep from rusting.
Playground Equipment
Pooper Scooper:
Use Fluid Film® to keep poop from sticking to shovels and pooper scoopers.
Pruning Sheers & Saws:
It will help them slide easily & prevent rust. Fluid Film® will also keep
sap from sticking.
Rain Gutters:
Spraying a light film will help keep dirt and leaves from sticking.
Recliners and Rockers:
Use Fluid Film® to keep from squeaking.
Sliding Doors:
Spray a small amount along the tracks. Will move smoothly and freely for
extended periods.
Table Saws:
A thin coat will keep table saws from rusting.
Tools:
Spray on tools directly and rub in with dry cloth, or spray on cloth and
rub in. Fluid Film® will leave a thin film which will provide long-term
protection. All tools and equipment being stored.
Under Bedliner of trucks
Under lawnmower decks:
Fluid Film® will prevent any corrosion from occurring and ease in removal
of grass build up.
Wheelbarrows:
Fluid Film® will lubricate wheels and protect wheelbarrow from rust.
Window Channels
Recreation
ATV's: Fluid Film® can be applied before four wheeling to make
clean-up much easier. Dirt and mud will hose right off a coated surface.
It is also an excellent chain lube and all around lubricant and corrosion
preventive.
Bicycles: Use Fluid Film® to lubricate bottom brackets, derailleur,
headseats, hubs and seat posts. Use on all nuts and bolts, gears, levers
and break cables.
Bicycle Chains: Spray on chains, wipe off excess. Will leave a thin
film which is resistant to dirt build-up, providing long term lubrication
and protection from rust.
Boats
Boat Trailers: Apply to all electrical connections for lighting
system, suspension leaf springs and spring hangers, hull rollers (bearings
or bushings), hitch coupling connections, ball hitch, height Adjustors,
winch, any exposed metal.
Camping Equipment
Dirt Bike Swing Arm Bushings
Exercise Equipment
Firearms: Spray on rag and then rub down firearm, leaving a thin
film residue which will not leave fingerprints or come off on hands or
clothes. Tack-free mechanism lubrication. Use on bolts, slides and
magazines. Will not affect bluing. Good for wood-stock.
Fishing Reels: Lightly coat to protect from salt spray. Use Fluid
Film® to lubricate screws, bearings, cogs, drag washers and use as a
protective coating.
Golf Carts
Golf Clubs: Use Fluid Film® on steel shafts & heads in storage.
Jetskis
Knives: Spray a small amount of Fluid Film® on a rag and rub in.
Works great for protecting and lubricating folding knives.
Leather Hunting Boot Conditioner
Motorcycle Chains: Spray Fluid Film® directly on the chain, wiping
excess off with clean rag. Fluid Film® will migrate into all areas,
providing long-lasting lubrication and protection from rust. There will be
an initial dusting because of the non-drying application of the product,
but Fluid Film® does not gum up or create a build-up of dirt.
Off-Roading: Apply Fluid Film® before off-roading so dirt and mud
will wash off easier.
Roller Skates: Use Fluid Film® to lubricate bearings.
Outboard engines including interior housing from salt spray
RV's:
Use Fluid Film as an undercoating to protect from salt exposure and rust,
for battery terminals, for awning hardware, trailer hitches, electrical
connections and terminals, anywhere rust or corrosion could be a problem.
Because of low water volume, Fluid Film is also an excellent release agent
for use in RV toilets.
Scooters
Skateboards
Snowmobile: Spray on clutch to keep moisture from getting in or
freezing, tail light lens to prevent snow from sticking.
Treadmill Belts
Weights:
Apply a thin film then rub in to keep weights rust free. |
FILM*
Dealer
