Meyer Super V 2 plow Smith Brothers Services, LLC
PLOW PARTS

TRUCK PARTS

PLOW REPAIRS

Re-skinning a Plow
FAQ

We DO NOT re-skin plows in season. We ONLY re-skin plows in March, April, May, and June.

We are constantly asked if we sell and ship skins. We do NOT. We do NOT sell skins. We re-skin plows here in our shop only.

We do sell all of the other parts of the Moldboard in our Online Store though, Ribs, Pivot Tubes, Shoe Brackets, etc. However, as of 2016 Meyer is not making any more parts for the TM, ST, and C as they run out, that is it. Parts are becoming obsolete.

Next is "How much is it going to cost?" Well that does vary.

IF you bring us JUST the Moldboard (which we prefer) with no black iron (A Frame or Sector) on it, then:

Re-skin ST-78 (6.5'), ST-7, ST-7.5 (ST-90) = $375 (2016). This does NOT include priming or painting the Moldboard. This does not include Pivot Tube repairs/replacement or removing seized Pivot Pins.

Painting (over existing paint on ribs and frame) the Moldboard = $200

So if you brought us one of the above Moldboards and wanted it re-skinned and painted, it would be $575. This does not include any repairs to the frame such as Pivot Tubes that need to be replaced, or a worn cutting edge that you want replaced.

Re-skin a C-8 Moldboard = $650 There is a lot more work involved doing a C Series. Again, this is just the Moldboard brought to us, with no black iron attached. This is unpainted. This does not include Pivot Tube repairs/replacement or removing seized Pivot Pins.

Painting (over existing paint on ribs and frame) the Moldboard = $200

Any work involving us removing the A Frame and Sector is billed hourly, any necessary parts are extra as well.

So if you wanted us to re-skin your C-8 Moldboard, and paint it, the price would be $850 (not including other repairs if necessary).

The Meyer Facelift program may be a better choice vs. re-skinning. 

Because of the Facelift Program, Meyer is no longer manufacturing TM, ST, and C Series Moldboards! Parts are becoming obsolete as Meyer runs out.

Re-skinning a TM Moldboard = $225. Again, this is just the Moldboard brought to us, with no black iron attached. This is unpainted.
This does not include Pivot Tube repairs/replacement or removing seized Pivot Pins. Paint is $200.

Here are some examples of re-skinning we have done:

 

Re-skinning an ST-7.5 Another ST-7.5 Re-skinning
Building an ST-78 Re-skinning a C-8  

 

Smith Brothers Services - Home Page

(973) 209-PLOW

Smith Brothers Services, LLC
3212 State Route 94
Suite 9
Franklin, NJ  07416
(973) 209-7569
sales@smithbrothersservices.com

Meyer Factory Trained Logo - MeyerPlows.info

Entire site Copyright 2016 Smith Brothers Services, LLC All Rights Reserved

Our Other Sites:
Snowplowing-Contractors.com      ChucksChevyTruckPages.com    SmithBrothersPlowParts.com  MeyerST.com
   MeyerPlows.info   PlowPump.info    MeyerPlowPumpParts.com Home-Plow-By-Meyer.com

MeyerE-57.com MeyerE-60.com MeyerE-58H.com MeyerDrivePro.com MeyerLotPro.com MeyerE-47.com MeyerRoadPro.com

Hit Counter